Backup power GETI GEP301 sinus 300W wallmout + battery 33Ah

The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.

Warning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.

Product description:

- inverter, UPS, AVR and charger in one device
- clear LED colour display
- high efficiency due to construction with toroidal transformer
- high charging current
- protection against overload, short circuit, overcharging and reverse polarity.



Technical parameters:

- type of backup batteries: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 500VA
- rated power: 300W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ± 3% - 50Hz / pure sine wave
- charging current: 5 A / 10 A optional
- charging voltage: 13.6V ± 0.3V
- low battery voltage limit: 11 V ± 0.3V
- battery low voltage protection point: 10.5V ± 0.3V
- transfer time: < 4 ms
- cooling system: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- dimension: 253 x 241 x 102 mm
- weight: 4 kg


The MOTOMA AGM lead-acid traction battery offers high performance for driving wheelchairs, electric bicycles, electric scooters, electric scooters and other mobile machines. It is also suitable for solar and wind energy systems, for UPS, EPS systems, security technology, etc.
The battery meets the requirements of serial and parallel connection to achieve higher voltage or capacity according to the requirements of the appliance.
It is a maintenance-free, hermetically sealed accumulator, which enables any working position.

Technical parameters:

- production technology: VRLA (valve regulated lead acid) - valve-controlled lead acid batteries
- type: AGM
-Voltage: 12 V
-Capacity: 33 Ah
-Dimensions: 195 x 130 x 155 mm
-Total height (with end caps): 165 mm
-Connection (terminals): M6 screw
-Weight: approx. 10.2 kg

Rated capacity (25°C)
-36.0Ah - applies when loaded with a nominal current of 1.8A for 20 hours
-33.3Ah - applies when loaded with a nominal current of 3.33A for 10 hours

- internal resistance (fully charged battery): approx. 9.0 mΩ
- charging voltage: Backup operation "standby": 13.6 - 13.8 V
Cyclic use: 14.6 - 14.8 V
- initial current < 9.9A

Packaging: 1 pc GETI GEP301 backup power source + 33AH lead battery
Weight: 15 kg