LED strip 12V 5050 60LED/m IP20 max. 12W/m RGB (reel 5m) Geti

The RGB LED strips consist of three chips (Red, Green and Blue) placed in a single case. The resulting colour of the strip is then achieved by combining different light intensity of each RGB chip.

To set the desired intensity and colour of the RGB strips, it is advisable to choose one of the offered RGB controllers, which can be found in the "Accessories" section.

RGB strips can be used both indoors and outdoors. They are mainly used for decorative lighting of apartments, bars, staircases, showcases or shop windows, advertising areas etc. You can control the lighting with the remote control according to your mood.
Led strips can be cut into individual modules (each module consists of 3 LED chips). They can be joined with corresponding connectors or soldered (surfaces needs to be cleaned from paint or silicone)
For long lifetime and proper function of LED strips, it is recommended to install them in AL profiles, which ensures heat dissipation and cooling of the LED strips.

Technical parameters:

- power supply: 12V DC
- chip type: 5050
- number of LED: 60/m
- consumption: max. 12 W/m
- color: RGB
- luminous flux: 12-15 lm/LED
- beam angle: 120°
- protection: IP20 (not waterproof)
- dimensions: 100 m x 5 m
- operating temperature: -25° to 85° C
- double-sided self-adhesive 3M tape on the back - before application the surface must be cleaned of dirt and degreased
- price is for 5 m of LED strip

Due to cooling, it is recommended to install the LED strip lights into aluminum profiles. Application to other surfaces may cause overheating and damage to the strips and may be considered as damage caused by improper use.